CR 600
Chattering Relay Accessory
CR600 Chattering Relay
Chattering Relay Accessory
- For testing to DO 160 Section 19.3.5 Standard
- Quick-connect, touch-proof connectors for safe and efficient setup
- Includes oscilloscope connection points for voltage monitoring
- Optimized for use with AE Techron amplifiers and test systems
Key Performance Capabilities:
- Coil Voltage: 24 VDC
- Coil Current: 84 mA
- Contact Rating: 30A
- Typical Pulse Voltage: >700 Vpp
OVERVIEW
The AE Techron CR 600 Chattering Relay is a cost-effective, rugged yet elegant solution to the DO 160 Section 19.3.5 “Spikes Induced into Interconnecting Cables” test requirement.
Internally built around a 50A high-current relay with two independent sets of contacts, the CR 600 was engineered for double the life before refurbishment.
The CR 600 uses quick-connect, touch-proof connectors to ensure efficient setup and a safe test environment. It also includes quick-clip test points for oscilloscope monitoring of tests in progress.
When driven from an intermittent voltage source like the AE Techron DSR 100-25 and utilizing test waveform, “Section 19.3.5 CR 600”, the CR 600 output meets the voltage (600V), duration (50 – 1000 µs) and repetition-period (0.2 to 10 µs) requirements specified by the DO-160 standard.
PERFORMANCE
Examples of output from the CR 600 Relay System when driven by AE Techron’s 3110A Standards Waveform Generator’s test routine “Section 19.3.5 CR 600”
Example of output from the CR 600 when adjusted to yield a pulse repetition rate of eight to ten pulses per second.
Example of output from the CR 600 when adjusted for a pulse sequence with an amplitude greater than or equal to 600 Vpp, and a total duration of 50 to 1000 microseconds.
Example of output from the CR 600 when adjusted for a repetition period of 0.2 to 10 microseconds.
SPECIFICATIONS
Performance
- Coil Voltage: 24 VDC
- Coil Current: 84 mA
- Contact Rating: 30A
- Typical Pulse Voltage: >700 Vpp
Controls and Connectors
- Amplifier Connections: Dual binding posts
- Radiating Loop: Dual binding posts
- Oscilloscope: Dual turret connectors
Physical Characteristics
- Case: Injection-molded plastic
- Operating Conditions,
- Temperature: 10°C to 40°C (50°F to 104°F)
- Humidity: 70% or less, non-condensing
- Recommended Ambient Temperature: 25°C (77°F)
- Cooling: Natural air convection
- Weight: 1.5 lbs. (0.68 kg)
- Dimensions (HxWxD): 3.25 in. x 6.25 in. x 7.25 in. (8.3 cm x 15.9 cm x 18.4 cm)
PHOTOS
Controls, Indicators and Connectors
Application
DOCUMENTS / DOWNLOADS
| CR 600 Data Sheet | CR 600 Instruction Sheet |
 |
 |
