T1000
Magnetic Field Susceptibility Transformer
T1000
Ten-to-One Step-Down, Up to 100 ARMS Secondary Current
- For testing to DO 160 Section 19 and Boeing D6-16050-5 Section 7.2 standards
- Optimized for use with AE Techron 7220 Series amplifiers
- Protected from over-current by 12A circuit breaker
- Durable steel and high-density polyethylene case for impact resistance
Key Performance Capabilities:
- Up to 100 ARMS secondary current
- Provides up to 300 A-m
- Ten-to-one step-down
- Output via feed-through terminal block connectors (150A); accepts up to AWG 1/0 wire
OVERVIEW
The T1000 Magnetic-Field Susceptibility Transformer was designed to exceed the AF Magnetic Field susceptibility test requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2. It may also be used as a 10-to-1 step-down transformer for output current of up to 100ARMS.
The T1000 transformer provides up to 300A-m and is able to generate up to 100ARMS. The turns ratio provides a ten-to-one step down to the secondary winding.
The T1000 provides convenient input connectors via binding posts. Standard 0.75-inch spacing of binding posts allows use of standard plugs. Output is via Multi Contact 125A plugs.
A 12-amp circuit breaker protects the unit against over-current conditions. A rugged, impact-resistant case and robust design protects the transformer from accidental damage.
The T1000 transformer is for use by experienced staff.
PERFORMANCE
T1000 Maximum SOA (Safe Operating Area)
SPECIFICATIONS
Technical
- Primary: 200 Vp maximum input
- Secondary: 20.0 Vp maximum output
- Dielectric Test: 1200 VDC
- Turns Ratio: Ten-to-one step down
- Protection: Input power-protected via circuit breaker
Controls and Connectors
- Input Terminals: 4-way binding posts
- Output Terminals: Feed-through terminal block connectors (150A); accepts up to AWG 1/0 wire
- Circuit Breaker: Primary input limited to 12A; push to reset
Physical Characteristics
- Case: Steel interior shell with a durable external shell made from high-density polyethylene for impact resistance.
- Operating Conditions,
- Temperature: 10°C to 40°C (50°F to 104°F)
- Humidity: 70% or less, non-condensing
- Recommended Ambient Temperature: 27°C (77°F)
- Cooling: Natural air convection
- Weight: 15 lbs. (6.8 kg)
- Dimensions (WxDxH): 5.25 in. x 10.375 in. x 9.75 in. (13.3 cm x 26.4 cm x 24.8 cm)
PHOTOS
Controls, Indicators and Connectors
Application
Meets or exceeds the performance requirements for DO 160 Section 19 Testing
DOCUMENTS / DOWNLOADS
| T1000 Data Sheet | T1000 Instruction Sheet | T1000 Declaration of Conformity |
 |
 |
 |
