EMC Test Systems
Automotive | Aerospace| Capacitor | Telecom
WAVEFORM GENERATOR
3110A Standards Waveform Generator
The 3110A is a simple-to-use yet powerful standards waveform generator. It can be combined with other AE Techron products to quickly create a wide range of powerful and intelligent EMC test solutions. The 3110A outputs a standard analog signal that can work with any AE Techron amplifier or other LF amplifiers that you already have. When coupled with the AE Techron model 7234 amplifier, the 3110A can create virtually all waveforms, DC offsets, dropouts and surges needed for EMC test with rise/fall times of 2µs or greater and frequencies from DC to 1 MHz.
System Features:
- Includes library of 3,400+ pre-entered Automotive, Aviation, and Industry Standards’ test routines.
- Up to 1 MHz EMC Testing.
- Dramatically reduces test time for repetitive test sequences.
- Semi-automatic calibration routine significantly reduces labor-intensive tasks (like CS101).
- Very easy to modify included waveform sequences or create new ones.
HIGH-VOLTAGE TEST SYSTEMS
HVR 1000CS: High-Voltage Ripple Test System
High-voltage electric vehicle testing is a rapidly growing automotive test requirement. With the HVR 1000CS, AE Techron introduces a complete high-voltage test system. This powerful new test system is designed for the electric vehicle (EV) testing industry, providing unparalleled accuracy and efficiency in assessing EV component immunity to ripple voltages.
System Features:
- High-voltage capability: Generates ripple voltages up to 1000V peak-to-peak
- Precise waveform generation: Produces accurate sine, triangle, and custom waveforms from DC to 200 kHz
- Integrated safety features: incorporating multiple layers of protection
- User-friendly interface: intuitive controls and data logging
- Expanded testing capabilities: Standards library and AC supply can be used for hundreds of automotive and aviation standards tests
HVR 2000CS: High-Voltage Ripple Test System
Building on the robust foundation of the HVR 1000CS, the HVR 2000CS doubles the available output voltage to 2000Vp, giving test engineers even greater headroom and flexibility to simulate real-world ripple conditions in demanding high voltage ripple environments.
System Features:
-
- High-voltage capability: Generates ripple voltages up to 1000V peak-to-peak
- Precise waveform generation: Produces accurate sine, triangle, and custom waveforms from DC to 200 kHz
- Integrated safety features: incorporating multiple layers of protection
- User-friendly interface: intuitive controls and data logging
- Expanded testing capabilities: Standards library and AC supply can be used for hundreds of automotive and aviation standards tests
LOW VOLTAGE TEST SYSTEMS
DSR 100 Series: Automotive Conducted Immunity Test System
Our DSR 100 drop-out, surge, ripple simulator and AC/DC voltage source provides a complete, single-box solution for automotive immunity testing. This includes a simple-to-use, yet powerful standards waveform generator matched with an industry leading power supply technology.
System Features:
- Includes library of 3,400+ pre-enterd Automotive and Industry Standards’ test routines.
- Operate as a free-standing system using the included monitor, keyboard and mouse, or control via LAN.
- Very easy to modify existing tests or build new test sequences.
- Can function as a controller or node in a larger test system via built-in LAN and GPIO controls.
- Models from 25A to 200A continuous output current.
CIS-25: Aviation Conducted/Induced Susceptibility Test Kit
AE Techron’s CIS-25 Test Kit combines into a single, complete package the items needed to accurately test to important Aviation standards like DO-160 Sections 16, 18, & 19, Boeing, Airbus, and MIL STD 461. Included with the kit are three coupling transformers (T1000, T2000, and T3700), the CR600 Chattering Relay accessory, and a secure storage cabinet to keep the equipment safe.
System Features:
- Includes two hours of expert consulting provided by EMC Specialist Patrick G. Andre, who will answer questions regarding set-up or testing.
- Includes the DSR 100-25 test system, providing continuous DC power as rated, and is able to provide 4X rated power for in-rush testing up to 200 ms (such as is required in DO 160 Section 16).
- Includes the complete 3110A Standard’s Library, so the CIS-25 Test Kit can be used for many other tests.
- Easy to set up and use; all elements in the kit are robust and will provide you with many years of trouble-free service.
CIS-25 ALC: Aviation Conducted/Induced Susceptibility Test System
AE Techron’s CIS-25 ALC test system is an enhanced version of our traditional CIS-25 test kit with added Automated Level Control (ALC). This creates a closed-loop control system that measures output and adjusts gain dynamically, improving accuracy and efficiency in ripple testing. For DO-160 Section 18, this can save hours of manual adjusting.
The Test System includes three coupling transformers (T1000, T2004, and T3700), CR600 Chattering Relay, and all necessary cables and connectors – plus two hours of expert consulting with EMC specialist Patrick G. Andre, who can assist with system configuration, test execution, and interpretation of standards.
Key Benefits of ALC Technology:
- Voltage sense performed on secondary side of coupling transformers
- Active impedance sensing prevents over-testing
- Fully automated amplitude determination – no manual tuning required
DSR 400 Series: Aviation AC and DC Power Test System
Our drop-out, surge, ripple simulator and AC/DC voltage source provides a complete, single-box solution for DO-160 Section 16 (115V, 14VDC, 28VDC) and MIL STD 704 Sections 1-8. This includes a powerful standards waveform generator, an industry-standard arbitrary waveform generator, and an industry-leading power supply technology.
System Features:
- Operate as a free-standing system using the included monitor, keyboard and mouse, or control via LAN.
- Very easy to modify existing tests or build new test sequences.
- Can function as a controller or node in a larger test system via built-in LAN and GPIO controls.
- Models from 80A to 160A continuous output current.
- Both the 80 and 160 models allow the choice of either Siglent (model SDG 2042X) or Keysight (model 33511B) arbitrary waveform generator, with the Keysight configuration providing TAA compliance.
DSR 425 Series: Aviation AC and DC Power Test System
AE Techron’s DSR 425 is a comprehensive AC, DC, and mixed-mode (AC + DC) test system designed to meet a wide range of civil, commercial, and military aviation standards. The DSR 425 comes preprogrammed with an extensive library of standard tests. Users can easily modify existing tests or create new ones to accommodate over-testing or non-standard requirements. It provides full compliance with: DO-160 Sections 16, 18, and 19 MIL-STD-704 Sections 1-8, and MIL-STD-461 (CS101).
Key Features:
- 4-Quadrant
- ±425VDC, 360VAC, up to 160A
- DC to 150 kHz bandwidth
- 3mΩ DC Source Impedance
- Includes 3 Coupling Transformers, Chattering Relay, Cables, Monitor and Keyboard
- Also includes ALC – Automated Level Control (Sec. 18)
- Two hours of consulting support from Patrick Andre, DO-160 standards committee member and aviation EMC expert.
4301 Series: DC Voltage Variations and Telecom Transients Testing
The 4301 Series has been specially designed for EMC testing of network telecommunications equipment and is the best system available for producing the waveforms required for transient voltage measurements as described in GR-1089 Section 10 and ATIS-0600315.2007. The 4301 includes a SDG2042X Function/Arbitrary Waveform Generator, which comes pre-programmed and integrated into the 4301 system. Together, the 4301 with Siglent AWG provides a complete solution for GR-1089 Section 10/ATIS-0600315.2007 testing.
System Features:
- Slew rates up to 60 V/µsec.
- Up to 240A DC at +50V DC or -50V DC (4301-240 configuration).
- Can provide pulses of up to 800 amps at voltages of up to ±100V (4301-240 configuration).
- Adjustable compensation allows the system to maintain a 50V/2 µsec rise-time over a wide range of current outputs.
CAPACITOR TESTING
Linear and Switch-Mode Amplifiers for a Variety of EMC Testing
AE Techron is a world leader in the design and manufacture of DC to 1MHz industrial power amplifiers and test systems. We produce high-reliability, wide-bandwidth, low-noise linear and switch-mode amplifiers while surrounding our products with great technical support, creating an unmatched value for our customers.
Featured Amplifiers:
- 7224/7234: Industrial Amplifiers / Battery Simulators
- 7700 Family: Four-Quadrant, DC-Enabled Linear Power Amplifiers
- 8000 and 9000 Families: Wide-Bandwidth, High-Power Switch Mode Amplifiers
